C PF-16/85 PF-16/85 TTP-240 DP-4 DP-2 MTP-240 PF-16/85 PF-16/85 PF-16/85 PF-6R C6 PHOTOVOLTAIC POWER CONNECTIONS PF Fuse Holder Electrical protection device, adapted to be connected directly to the connector SX-NC and DP connector, allowing a quick and efficient connection of the photovoltaic modules. Sections I max. (A) 63 A 63 A Note: PF-6R P12: Fuse holder to SX-150NC. PF-6R C6: Fuse holder to DP-2, DP-4 and SX-16NC. PF-16/85: Fuse version 10x85, 1500VDC. The mod. DP connectors are composed by a preinsulated module to carry out the connection on hot lines, by means of isolated bolt with a torque control system incorporated. DP Preisolated Connectors Connections Sections (mm )2 I max. (A) Sections (mm )2 TTP Preinsulated bolted terminations 1,5K VDC Terminal for cable connection by tightening torque control screws. MTP Underground joint connectors 1,5K VDC Pre-insulated screw sleeve with tightening control system for cable connection. Sections (mm )2 SX-NC Branch Connectors Simultaneous tightening connector with sealing gasket, which allows to connect with great safety and fastness in tension, provided with jagged teeth inside to make the connection to perforation of the insulation. Sections (mm )2 Main Branch HARNESS Conection String-Bus Composite by fuse holder + MC-4 or similar, Length “L” and section 4 or 6 mm2. L x solar wire (4 or 6mm) + PF-6R + MC-4 or similar (1.000VDC) L x solar wire (4 or 6mm) + PF-16/85 + MC-4 or similar (1.500VDC)
RkJQdWJsaXNoZXIy NDM0MTU2